Nowadays, more and more beryllium copper mold materials have been used in the manufacture of plastic molds, and there is a rising trend. What is the reason for this phenomenon? Let me learn about the use of beryllium copper in plastic molds with the editor, and why.
For zinc alloy die castings to be electroplated surface treatment, this link is very important. If the electroplating is not done well, all the work in the early stage will be wasted. Therefore, we must pay attention to the electroplating process of the product. Then the quality of electroplating is affected by those factors. Carbide die casting summarizes the following for you:
The existence of forging defects may affect the processing quality or processing quality of the subsequent processes, and some seriously affect the performance and use of the forgings, and even greatly reduce the service life of the finished parts and endanger safety.
For zinc alloy die castings to be electroplated surface treatment, this link is very important. If the electroplating is not done well, all the work in the early stage will be wasted. Therefore, we must pay attention to the electroplating process of the product. Then the quality of electroplating is affected by those factors. Carbide die casting summarizes the following for you:
Nowadays, more and more beryllium copper mold materials have been used in the manufacture of plastic molds, and there is a rising trend. What is the reason for this phenomenon? Let me learn about the use of beryllium copper in plastic molds with the editor, and why.
What details should be paid attention to when the small oil press is pressed? Our company has summarized some for you, and I hope it will be helpful to you. Remove the oil side of the sieve cloth. During inspection, if the screen surface is not horizontal, the length of the left and right arms should be adjusted to make them equal; if the screen body appears torsion, the eccentric wheel shaft can be adjusted to be perpendicular to the frame. If the oil on the surface of the stone mesh is single-sided, the frame can be adjusted to make it level; if the air flow is uneven, the air box of the air box can be adjusted to make the air flow evenly blow to the screen surface. If the net impurity rate is low, replace the brush with a new one or adjust the length of the brush, Read more