The soybean oil press is also called the soybean oil press. The soybean oil press we produce is an oil press developed by introducing Korean technology and cooperating with domestic and foreign grain and oil machinery experts. It meets the technical conditions and standards of the agricultural soybean oil press of the Ministry of Agriculture. It is required that the processed and produced oil products are authentic, authentic and pure, and are the choice for the creation of a modern oil mill. The soybean oil press is scientific in design, reasonable in structure, easy to operate and stable. It adopts a fully automated device and only takes a few minutes from feeding to finished product at a time. Using high-carbon steel, high-frequency quenching, heat-resistant treatment, high hardness, high strength, good wear resistance, suitable for high temperature and high pressure continuous operation, improve the service life of the oil press, the use time can reach several decades Long.
Principle of soybean oil press:
When the soybean oil press is running, the processed oil enters the press chamber from the hopper. The raw material is continuously pushed inward by the squeezing screw for squeezing. Because the material embryo is in motion in the press chamber of the oil press, under the condition of high pressure in the press chamber, a great frictional resistance is generated between the material embryo and the snail, and the material embryo and the press chamber. It can cause friction between the micro-materials of the embryonic material and cause relative movement. On the other hand, because the diameter of the root circle of the snail is gradually increased and the pitch is gradually reduced, when the snail is rotated, the thread-strengthened blank can be pushed forward and turned outward, and it is close to the screw thread at the same time. The surface material layer also rotates with the press shaft. In this way, each embryo particle in the press chamber does not move at the same speed and in the same direction, but there is also relative movement between the particles. The heat generated by the friction meets the heat required for the operation of the oil extraction process, which helps to promote the thermal denaturation of the protein in the raw material, destroys the colloid, increases the plasticity, and reduces the viscosity of some oils, which is easy to precipitate. The oil output rate of the soybean oil press is improved, so that the oil in the material is squeezed out and flows out from the gaps in the circular rows and the gaps in the rows.
Installation method of soybean oil press:
Before installation, clean up the newly purchased oil press. Pull out the main shaft, remove the upper squeezing cage, and use emery cloth to polish the outer and inner surfaces of the snail and the screw feeder smoothly. Add lubricating grease to all lubricating parts. The type and brand of lubricating oil added in the gearbox should meet the requirements of the instructions. After the round row is polished and clean, it needs to be arranged in the original position when installing the machine, and cannot be misaligned, because the arrangement position and order of the round row have a great relationship with the oil extraction performance. After the round row machine is installed, it is compressed with a compression nut, and the degree of compression should be such that the disc can creep when the oil is pressed. After the oil press has been processed above, it can be fixed on the foundation with anchor bolts. During installation, the pulley of the motor should be aligned with the pulley of the oil press, the position is appropriate, the direction of rotation is correct, and the tightness of the transmission belt should be adjusted properly.